Iwata Mangusta Automatic Spray Gun

1223

WAM 220 Mangusta (Automatic Spray Gun)

Item No.: WAM 220 WB

Technical Information:

Nozzle: 0.8mm
Operating Pressure (max.):
6.8 bar
Air Cap: WB1
Spray fan pattern: 300mm
Atomization Technique: Patented pre atomization nozzle technology
Atomizing air connection:
1/8”F
Weight (without manifold):
700g
Weight (manifold): 380g
Fluid connection: 1/8”F
Operating air connection:
1/8”F
Fan pattern air connection:
1/8”F
Fixing hole diameter:
13 mm
Dimensions:
85.5x145x40 mm

Features:

Different from most other automatic spray guns, this gun can be operated without a solenoid valve. The air for atomization and fan are close together with air piston.
There is a simple quick disassembling from manifold, i.e. the gun can be detached in only two simple steps. The air cap features an index (90°- 180°)  and the fluid needle can be adjusted in 16 positions. The fluid needle and air piston can be disassembled from the rear of the spray gun. Good against wear: the needle packing has an automating compensation of wearing. Stainless steel fluid passages allow the usage of  water based materials.

Application:

general industrial applications, incl. water base and solvent borne fluid materials.

Service Manual

Iwata Manuals (Source: Anest Iwata)

Competitor Products:

Devilbiss Cobra, Graco AirPro EFX

More information:

www.anest-iwataeu.com

(picture source: Anest Iwata)

· ·


Related Articles & Comments

Comments are closed.