Clemco 1042 Sanderblaster with Grit Valve – Capacity 1 cu ft
The Clemco 1042 sandblaster (portable, single-chamber) is equipped with a 1/2 inch Manual Sand Valve (MSV), that can be used to meter expendable, mineral slag abrasives and allows consistent, adjustable media flow.
Description
Contents
Technical Specifications
Brand: Clemco
Model: 1042
Part No.: 21052
Type: single-chamber, portable blaster (classic)
Remotes: not included
Capacity: 1 cu ft [approx. 100 lbs]
Piping Size: 1/2 inch
Valve Type: MSV (Manual Sand Valve)
Air Requirements (min.): 12 cfm at 50 psi
Ball Valves: Stainless Steel with brass body (PTFE sealed)
Pop-Up Valve: PU (polyurethane) coated
Approvals/Certifications: ASME
Working Principle
The operator controls the blasting from a remote control handle at the nozzle (remotes and nozzle not Included). Pressing the handle starts the blast and releasing the handle stops the blast. The blast machine contains abrasive that is metered into the compressed air stream.
Features
The Clemco 21052 portable single-chamber sandblaster is equipped with a 1/2 inch Manual Sand Valve (MSV), that can be used to meter expendable, mineral slag abrasives and allows consistent, adjustable media flow. The 35 degree conical bottom of the chamber ensures total use of abrasives and uninterrupted abrasive flow. The vessel is equipped with an inlet ball valve and an outlet ball valve. This model with its 1 cubic foot of abrasive media can provide 15 minutes of blasting (@80 psi with # 4 (1/4-inch) nozzle).
Note: Recommended for use with fine-mesh media or glass beads.
Applications
Removal of contamination, corrosion and coatings from most surfaces
Service Manual/Parts Breakdown
Clemco 1042 Single Chamber Blast Machine 21052 manual (source: manualslib)
Additional information
| Brand |
|---|