IWATA LPH400 Spray Gun (HVLP)

Description

Technical Specifications

Model: LPH400-134LVX HVLP
Iwata No.: 5660
Application: Automotive, General Industry
Nozzle Size: 1.3 mm [0.051 inch]
Air Cap: LVX
Air Inlet Pressure (recommended): 1.1 bar [16 psi]
Air Consumption: 275 lpm [9.8 cfm]
Pattern Width: 300 mm [11.8 in]
Fluid Output: 120 ml/min
Gun Body: Cast Aluminum
Fluid Tip/Nozzle: Stainless Steel
Fluid Needle: Stainless Steel
Air Inlet Thread: ¼”
Gun Weight: 380 g [13.4 oz]

Features

This is a full-size center post gravity feed HVLP spray gun with 1.3 mm [0.051 in] nozzle size using the so-called LVX technology. It can be considered as a cost-effective alternative to the IWATA Supernova LS400.
Note: The spray gun is suitable for solvent and water based materials.

FAQ – Frequently Asked Questions

• What does ‘LV” stands for?
  The so-called LV Technology is a patented system in Iwata spray guns that pre-atomises paint before it leaves the nozzle, using less air pressure and air consumption than standard nozzles.
• What is the difference between Iwata LPH400-LV, LVB and LVX?
  The ‘LV’ gun can be considered as the standard version while the ‘LVB’ version can handle paints that contain fine metallic and pearls (which usually cause problems such as mottling and blotching), while the ‘LVX eXtreme’ is made for a wide range of basecoats and engineered to provide increased productivity in application for solvent or waterborne basecoats. Inlet pressures, spray distance and overlap are the same for the ‘LVX’ as for the normal ‘LV’
• What is the recommended air inlet pressure for Iwata LPH400LVX? 
  Iwata recommends an air inlet pressure of 1.1 bar [16 psi]

Applications

Woodwork, Furniture, Metal,Automotive refinish Touch-ups, Base Coat, Top Coat

Instruction Manual/Parts Breakdown:

Iwata LPH-400-LVB/-LVC/-LVX operating manual (*.pdf, source: Iwata)

Options/Accessories

(not included)

Repair/Rebuild Kit:
Parts and Rebuild Kit 5650 (not included)

Disposable Cup Adapters:
3M PPS 2.0 #S2 – 26003 (not included)
Sata RPS #1 – 125211 (not included)
Devilbiss DeKups DPC-11 (not included)

As an option, the spray gun is also available in the sizes of 1.3, 1.4, and 1.5 mm