Binks Model 30 Bead Gun for Line Striping

The Binks Model 30 Bead Dispensing Gun dispenses glass beads at a rate of up to 20 lbs/min. It is recommended that a pressure tank with a follower plate and bottom outlet.

When you buy through this link we may earn an affiliate commission at no extra cost to you. Learn more
Category:

Description

Technical Specifications

Manufacturer: Binks
Model:
30
Atomization: air-spray
Bead Spraying Capacity:
20 lbs/min
Weight:
6 lbs 1 oz

Features

The Binks Model 30 Bead Dispensing Gun dispenses glass beads at a rate of up to 20 lbs/min. It is recommended that a pressure tank with a follower plate and bottom outlet be used to feed the beads to the gun. Air is not required for atomization. However, air is required to “on/off” the cylinder (minimum 50 psi).

Applications

Line Striping, for laying glass beads during a line striping operation. The gun can be used on either hand line stripers or moving trucks.

Instruction Manual/Parts Breakdown

Binks Model 30/30A operating manual (source: manualzz)

Option/Accessories

(not included)

Repair Kit: 6-271 (not included)

As an option, nozzle inserts with orifice diameters of 7/32″, 1/4″, 9/32″ and 11/32″ are available for this gun