Devilbiss FLG5 (sgk) Spray Gun

(USA, Canada & worldwide shipping)
The Devilbiss FLG-G5-14 paint spray gun comes with a 1.4 mm nozzle size and is suitable for both industrial applications and automotive refinishing (primer, basecoat, 2K).

When you buy through this link we may earn an affiliate commission at no extra cost to you. Learn more

Category:

Description

Technical Specifications

Model: FLG-G5-14
Nozzle Size: 1.4 mm
Atomization Type: Trans-Tech (High-Efficiency)
Recommended Air Inlet Pressure: 2.4 bar [35 psi]
Air Pressure (max.): 12 bar [175 psi]
Air Consumption: 280 lpm [9.9 scfm]
Fan Pattern Size: 285-300 mm [11.0-12.0 inch]
Gun Body Material: Cast Aluminum
Air Cap Material: Brass
Retaining Ring Material: Aluminium
Fluid Tip/Nozzle Material: Stainless Steel
Fluid Needle Material: Stainless Steel
Air Inlet Thread: Universal ¼” (BSP and NPS)
Gun Weight: 640 g [1.4 lbs]
Cup Capacity: 560 ml [20.0 oz]

Applications

The Devilbiss FLG 5 spray gun can be considered a general purpose spray gun for a range of refinish paints and coatings for automotive refinishing and general purpose finishing. The gun utilizes Devilbiss Trans-Tech atomization technology.

Instruction Manual/Parts Breakdown

Finish Line FLG-5 Gravity Feed (*.pdf)
Finish Line FLG-5 Pressure Feed (*.pdf)


Options/Accessories

(not included)

Repair/Rebuild Kit: K-5040 (not included)
Disposable Cup Adapters:
3M PPS 2.0 #S15 – 26046 (not included)
Sata RPS #3 – 125252 (not included)
Devilbiss DeKups DPC-43 (not included)

As an option, the Devilbiss FLG-5 gravity spray gun is available in either 1.4 mm (model: FLG-G5-14) or 1.8 mm (model: FLG-G5-18). Both can be considered general purpose spray guns for a variety of refinish paints and coatings. The gun uses Devilbiss Trans-Tech atomization technology. As an option, the FLG-5 is also available in suction and pressure feed versions.

FAQ – Frequently Asked Questions

  • What is the model code of the FLG-5 spray gun?
    Examples:
    FLG-G5-14 is Gravity Feed Gun & Cup Kit (nozzle: 1.4 mm – Air Cap No. 5)
    FLG-S5-18 is Suction Feed Gun & Cup Kit (nozzle: 1.8 mm – Air Cap No. 5)
    FLG: Basis Model of spray gun
    G, S: Feed type (Gravity, Pressure, Suction)
    5 : Air Cap (#5)
    14: Nozzle Size (14=1.4mm)
  • Is Devilbiss FLG-5 and Devilbiss SGK-600 series the same spray gun?
    Devilbiss FLG-5 and Devilbiss SGK-600 series are basically the same spray gun (small differences may apply, e.g. availability of nozzle/tip sizes, etc.)
  • ‘Compliant’ Devilbiss FLG5 versus HVLP
    The ‘High-Efficiency’ air cap (Part. Number: 905332) is also commonly referred to as ‘compliant’ air cap. so the differences are in the air cap. See performance of each air cap below.
  • What is the difference betwee Devilbiss FLG-5 and FLG-693?
    The Devilbiss FLG-5 and FLG-693 spray guns are basically identical (same spray gun body, same nozzles/needles, etc…), but they have different air caps.
    FLG-5 Air Cap
    Part. Number: 905332
    Atomization Type: High-Efficiency
    Recommended Inlet Pressure: 2.4 bar [35 psi]
    Air Consumption: 280 lpm [9.9 scfm]
    Fan Pattern Size: 285-300mm [11.0-12.0 inch]
    FLG-693 Air Cap
    Part. Number: 905334
    Atomization Type: HVLP
    Recommended Inlet Pressure: 1.75 bar [26 psi]
    Air Consumption: 340 LPM [12.0 scfm]
    Fan Pattern Size: 285-300 mm [11.0-12.0 Inch]

Additional information

Application

,

Atomizing technology

Brand

Nozzle size

,