Finish Line by Devilbiss: FLG Spray Gun Models

This is an overview of all spray guns of the Devilbiss ‘FLG’ series, from the previous (and now obsolete) model Devilbiss FLG3 (which includes the models FLG-692, FLG-693 and FLG-694) to the current models Devilbiss FLG4, Devilbiss FLG5/FLG to. The table compares each model’s atomization technique (Conventional, HVLP or High Efficiency), air caps and fluid tips, and shows which FLG models share the same.

Devilbiss FLG Model Overview

Spray Gun Model  Spray Gun Series Air Cap No. Feed Type Atomization
FLG2 FLG-606 #1 Suction conventional
FLG-601 #1 Suction conventional
FLG-611 #1 Gravity conventional
FLG-615 #1 Gravity conventional
FLG-611 #2 Gravity conventional
FLG-513 #3 Pressure HVLP
FLG-626 #3 Suction HVLP
FLG-631 #3 Gravity HVLP
FLG-635 #3 Gravity HVLP
FLG3 FLG-694 #1 Suction conventional
FLG-692 #3 Pressure HVLP
FLG-693 #3 Suction HVLP
FLG4 n/a #1 Gravity conventional
FLG-670 #3 Gravity HVLP
FLG-671 #3 Gravity HVLP
FLG-678 #3 Gravity HVLP
FLG5 FLG-G5 #5 Gravity High Efficiency
FLG-P622 #5 Pressure High Efficiency
FLG-S5 #5 Suction High Efficiency
FLG n/a #5 Gravity,
Suction
High Efficiency
905161 #693

Pressure

HVLP
905162 #693 Pressure HVLP
905163 #693 Gravity HVLP
905165 #693 Gravity HVLP
n/a #622 Pressure High Efficiency

scroll down for more ↓

Devilbiss FLG/FLG5 Parts and Repair Kits

There are several spare parts available for the latest Devilbiss FLG/FLG5 model, either as individual parts or in a repair kit.

Pos. Part No. Marking* Description
1 905345 SGK-23 RETAINING RING
2 690000
(FLG-1-1)
519001
#1 AIR CAP 1
(FLG-1-2K)
519002
#2 AIR CAP 2
690001
(FLG-1-3)
519003
#3 AIR CAP 3
905332
(FLG-1-5)
FLG-5 AIR CAP 5
905333
(FLG-1-622)
FLG-622 AIR CAP 622
905334
(FLG-1-693)
FLG-693 AIR CAP 693
3 905343 SGK-13-11 FLUID NOZZLE 1.1MM
905340 SGK-12-13 FLUID NOZZLE 1.3MM
905341 SGK-12-14 FLUID NOZZLE 1.4MM
905344 SGK-14-18 FLUID NOZZLE 1.8MM
905342 SGK-12-20 FLUID NOZZLE 2.0MM
4 905352 SGK-43-K10 GASKET (FLUID NOZZLE SEAL)
6 905339 K-5370 NEEDLE PACKING
16 905346 SGK-402-11 FLUID NEEDLE 1.1MM (PRESSURE FEED)
905347 SGK-402-12 FLUID NEEDLE 1.4 MM (PRESSURE FEED)
905351 SGK-430-18 FLUID NEEDLE 1.8MM (PRESSURE FEED)
905348 SGK-414 FLUID NEEDLE 1.3MM/1.4MM (GRAVITY FEED)
905349 SGK-418 FLUID NEEDLE 1.8MM (GRAVITY FEED)
905350 SGK-420 FLUID NEEDLE 2.0MM (GRAVITY FEED)
        GRAVITY CUPS
905204 GF-501 ACETAL GRAVITY CUP – 560 ML
905359 GFC-502 ALUMINUM GRAVITY CUP – 900 ML
          REPAIR KITS
905335 K-5030 BAFFLE REPLACEMENT KIT GRAVITY & SUCTION
(INCLUDES ITEMS MARKED #)
905336 K-5032 BAFFLE REPLACEMENT KIT PRESSURE ONLY
(INCLUDES ITEMS MARKED +)
905337 K-5040 SEAL BAFFLE & GASKET REPLACEMENT KITI GRAVITY & SUCTION
(INCLUDES ITEMS MARKED #)
905338 K-5044 SEAL BAFFLE & GASKET REPLACEMENT KIT PRESSURE ONLY
(INCLUDES ITEMS MARKED +)

scroll down for more ↓

  • The “marking” (see table) is often used as a part number in manuals and other documents. Therefore, it makes sense to search for it as well, in case the official “Part No.” cannot be found.
  • Some Devilbiss part numbers may have a suffix at the end, such as ‘-K’ or ‘-K2’. Such a suffix indicates a kit of parts. If there is no such suffix (or only a ‘-K’ suffix), this indicates that the quantity is one.

Similar Posts