Iwata WA-M220 Mangusta Automatic Spray Gun
Contents
Item No.: WA-M220 WB
Technical Information
Nozzle: 0.8mm
Operating Pressure (max.): 6.8 bar
Air Cap: WB1
Spray fan pattern: 300mm
Atomization Technique: Patented pre atomization nozzle technology
Atomizing air connection: 1/8”F
Weight (without manifold): 700g
Weight (manifold): 380g
Fluid connection: 1/8”F
Operating air connection: 1/8”F
Fan pattern air connection: 1/8”F
Fixing hole diameter: 13 mm
Dimensions: 85.5x145x40 mm
Features
Different from most other automatic spray guns, this gun can be operated without a solenoid valve. The air for atomization and fan are close together with air piston.
There is a simple quick disassembling from manifold, i.e. the gun can be detached in only two simple steps. The air cap features an index (90°- 180°) and the fluid needle can be adjusted in 16 positions. The fluid needle and air piston can be disassembled from the rear of the spray gun. Good against wear: the needle packing has an automating compensation of wearing. Stainless steel fluid passages allow the usage of water based materials.
Application
general industrial applications, incl. water base and solvent borne fluid materials.
Service Manual
Iwata Manual (Source: manualslob.com)
Competitor Products:
Binks Mach 1A, Graco AirPro EFX, Sata LPS RB2000 RP