OPTIMA 650 LVLP Gravity Spray Gun, 1.4mm

Optima 650i paint spray gun
Optima 650i Spray Gun (photo: Bersch & Fratscher)

Part No.: 650 LVLP (1395), 650 LVLP S (1396)

Technical Specifications

Nozzle/Needle: 1.4mm (1393-3/1393-U2)
Atomization Technique: LVLV (Low Volume Low Pressure)
Air Cap: 1395-U2
Transfer Efficiency: >70% (acc. to VOC – regulation)
Material flow rate: 260 g/min (@2,5 bar, 1.4mm nozzle)
Air inlet pressure (opt.): 2.0-2.5 bar
Air consumption:
119,0 l/min (@2,5 bar, round jet)
247,0 l/min (@2,5 bar, flat jet)
Weight (without cup): 480g

– Needle and nozzle made of stainless steel
– steplessly adjustable pattern width, air flow and fluid flow control
– turnable air connection


The OPTIMA 650 LVLP can be considered as an all-round spray gun and is particularly suited for the manufacturing sector as well as a filler / primer gun. Both gravity feed and suction feed models are available. The LVLP (Low Volume Low Pressure) guarantees minimum overspray. Unique is the round / flat jet regulation: the control knob for the round/flat regulation is located at the bottom of the spray gun just next to the air cap.
In addition, the material regulation and needle sealing are adjustable from outside. The nozzle are available in a range from 0.5 to 3.0 mm. Cups from other OPTIMA spray guns are compatible with this gun (also OPTIMA 650i and 650iS). As a standard the gun is equipped with a very flexible air connection which can be rotated and swiveled.

Also available:

OPTIMA Spray Gun 650i (1393)
OPTIMA Spray Gun 650iS (1394)

Available nozzle sizes: 0.5, 0.8, 1.0, 1.2, 1.3, 1.4, 1.5, 1.6, 1.8, 2.5, 3.0


Automotive refinishing, General purpose finishing, all-round spray gun designed for most applications

Similar Posts